R282-N80 (rev. 100)

3rd Generation Intel® Xeon® Scalable Processors
Dual processor, 10nm technology
TDP up to 270W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

2 x LGA 4189

Socket P+

32 x DIMM slots
DDR4 memory supported only
8-channel memory architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
3DS RDIMM/LRDIMM modules up to 256GB supported

1.2V modules: 3200/2933/2666 MHz

Rear side:
2 x 1Gb/s LAN ports (Intel® I350-AM2)
Support NCSI function

1 x 10/100/1000 management LAN

Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Front side:
8 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
16 x 2.5" SATA/SAS hot-swappable bays

Rear side:
2 x 2.5" SATA/SAS hot-swappable bays (Connected via SAS Expander)
SAS card is required to enable drive bays
Broadcom SAS35x36R expander
Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
8 x 2.5" NVMe drives, non-supported SATA/SAS drives without SAS card
Suggested 12Gb/s SAS cards:

CRA4448

Riser Card CRS2033:
- 1 x PCIe x16 (Gen4 x16) FHHL slot, from CPU_0
- 2 x PCIe x8 (Gen4 x8) FHHL slots, from CPU_0
Riser Card CRS2137:
- 1 x PCIe x16 (Gen4 x16 o x8) FHHL slot, from CPU_1
- 1 x PCIe x8 (Gen4 x0 or x8) FHHL slot, from CPU_1
- 1 x PCIe x16 (Gen4 x16 or x8) FHHL slot, from CPU_1, shared with OCP 2.0
Riser Card CRS2027:
- 2 x PCIe x8 (Gen4 x8) low-profile slots, from CPU_1
1 x OCP 3.0 slot with PCIe Gen4 x16 bandwidth, from CPU_0
Supports NCSI function
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth, from CPU_1

Supports NCSI function

2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
1 x VROC connector
1 x Front panel header
1 x HDD backplane board header
1 x IPMB connector
1 x Clear CMOS jumper

1 x BIOS recovery jumper

2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED

2 x LAN activity LEDs

2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN

1 x ID button with LED

Speed and bandwidth:
Front side - CBP20O7: PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s

Rear side - CBP2022: SATA 6Gb/s or SAS 12Gb/s

1 x TPM header with SPI interface

Optional TPM2.0 kit: CTM010

1+1 1600W 80 PLUS Platinum redundant power supplies (-100)
AC Input:
- 100-120V~/ 12A, 50-60Hz
- 200-240V~/ 10.0A, 50-60Hz
DC Input:
- 240Vdc/ 10A
DC Output:
- Max 1000W/ 100-120V~
+ 12V/ 81.5A
+ 12Vsb/ 2.5A
- Max 1600W/ 200-240V~ or 240Vdc Input
+ 12V/ 133A
+ 12Vsb/ 2.5A
1+1 1600W 80 PLUS Titanium redundant power supplies (-1T0)
AC Input:
- 100-240V~/ 12-9.5A, 50-60Hz
DC Input:
- 240Vdc/ 9.5A
DC Output:
- Max 1000W/ 100-120V~
+ 12.2V/ 82A
+ 12Vsb/ 3A
- Max 1600W/ 200-240V~ or 240Vdc Input
+ 12.2V/ 131.2A

+ 12Vsb/ 3A

Aspeed® AST2500 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

• Dashboard

• HTML5 KVM

• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)

• Sensor Reading History Data

• FRU Information

• SEL Log in Linear Storage / Circular Storage Policy

• Hardware Inventory

• Fan Profile

• System Firewall

• Power Consumption

• Power Control

• LDAP / AD / RADIUS Support

• Backup & Restore Configuration

• Remote BIOS/BMC/CPLD Update

• Event Log Filter

• User Management

• Media Redirection Settings

• PAM Order Settings

• SSL Settings

• SMTP Settings

• 
  

Windows Server 2016
Windows Server 2019
Windows Server 2022
Red Hat Enterprise Linux 7.9 (x64) or later
Red Hat Enterprise Linux 8.2 (x64) or later
Red Hat Enterprise Linux 9.0 (x64) or later
SUSE Linux Enterprise Server 12 SP5 (x64) or later
SUSE Linux Enterprise Server 15 SP2 (x64) or later
Ubuntu 20.04 LTS (x64) or later
Ubuntu 22.04 LTS (x64) or later
VMware ESXi 6.7 Update3 P03 or later
VMware ESXi 7.0 Update2 or later
VMware ESXi 8.0 or later

Citrix Hypervisor 8.2.0 or later

Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C

Non-operating humidity: 20%-95% (non-condensing)

1 x R282-N80
2 x CPU heatsinks

1 x 2-Section Rail kit

- Barebone package: 6NR282N80MR-00-1*
- Motherboard: 9MR92FS0NR-00
- 2-Section Rail kit (CMA not supported): 25HB2-3A0202-K0R
- CPU heatsink: 25ST1-343102-M1R
- Front panel board - CFP2001: 9CFP2001NR-00
- Backplane board - CBP20O7: 9CBP20O7NR-00
- Backplane board - CBP2022: 9CBP2022NR-00
- Fan module: 25ST2-883829-D0R
- Riser card - CRS2027: 9CRS2027NR-00
- Riser card - CRS2033: 9CRS2033NR-00
- Riser card - CRS2137: 9CRS2137NR-00
- Power supply (-100): 25EP0-216008-L0S
- Power supply (-1T0): 25EP0-21600E-L0S

Optional parts:
- VROC module: 25FD0-R181N0-10R (Supported for Intel SSD only)
- 3-Section Rail kit (Supports CMA): 25HB2-AA6105-K0R
- Cable Management Arm: 25HB1-R18300-K0R
- RMA packaging: 6NR282N80SR-RMA-A100