R163-S35 (rev. AAH1)

5th Generation Intel® Xeon® Scalable Processors
4th Generation Intel® Xeon® Scalable Processors
Intel® Xeon® CPU Max Series

Single processor, CPU TDP up to 350W

1 x LGA 4677

Socket E

16 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported
5th Gen Intel® Xeon®: Up to *5600MHz (1DPC), 4400MHz (2DPC)
4th Gen Intel® Xeon®: Up to 4800MHz (1DPC), 4400MHz (2DPC)
Intel® Xeon® Max Series: Up to 4800MHz (1DPC), 4400MHz (2DPC)

*5600MHz support under 2DPC configuration requires verified memory and BIOS setup. Please refer to the QVL for more information.

Rear side:
1 x 1Gb/s LAN port (1 x Intel® I210-AT)
Supports NCSI function

1 x 10/100/1000 management LAN

Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Front side:
12 x 2.5" Gen5 NVMe/SATA/SAS4 hot-swappable bays

SAS card is required for SAS devices support

Riser Card CRS101P:
- 1 x PCIe x16 (Gen5 x16) FHHL slot
1 x OCP 3.0 slot with PCIe Gen5 x16 bandwidth
Supports NCSI function
1 x M.2 slot:
- M-key
- PCIe Gen3 x4, from PCH

- Supports 2280/22110 cards

1 x TPM header

1 x VROC connector

1 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x Reset button
2 x LAN activity LEDs (1 x LED disabled)
1 x Storage activity LED

1 x System status LED

2 x USB 3.2 Gen1
1 x Mini-DP
1 x RJ45
1 x MLAN

1 x ID button with LED

Speed and bandwidth:

PCIe Gen5 x4 or SATA 6Gb/s or SAS4 24Gb/s

1 x TPM header with SPI interface

Optional TPM2.0 kit: CTM010

1+1 1300W 80 PLUS Titanium redundant power supplies
AC Input:
- 100-127V~/ 12A, 50-60Hz
- 200-240V~/ 8A, 50-60Hz
DC Input:
- 240Vdc/ 7A
DC Output:
- Max 1000W/ 100-127V~
+ 12.2V/ 82A
+ 12.2Vsb/ 3A
- Max 1300W/ 200-240V~ or 240Vdc Input
+ 12.2V/ 106A
+ 12.2Vsb/ 3A

Note: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

• Dashboard

• HTML5 KVM

• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)

• Sensor Reading History Data

• FRU Information

• SEL Log in Linear Storage / Circular Storage Policy

• Hardware Inventory

• Fan Profile

• System Firewall

• Power Consumption

• Power Control

• Advanced power capping

• LDAP / AD / RADIUS Support

• Backup & Restore Configuration

• Remote BIOS/BMC/CPLD Update

• Event Log Filter

• User Management

• Media Redirection Settings

• PAM Order Settings

• SSL Settings

• SMTP Settings

• 
  

4 x 40x40x56mm (29,700rpm)

2 x 40x40x28mm (25,000rpm)

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C

Non-operating humidity: 20%-95% (non-condensing)

1 x R163-S35
1 x CPU heatsink
1 x Mini-DP to D-Sub cable
3 x Carrier clips

1 x 2-Section Rail kit

- Barebone package (4th/5th Gen): 6NR163S35DR000ABH1*
- Barebone package (4th Gen): 6NR163S35DR000AAH1*
- Motherboard: 9MS33DC0UR-000
- 2-Section Rail kit (CMA not supported): 25HB2-3A0203-K0R
- CPU heatsink: 25ST1-4Z3200-S7R
- M.2 heatsink: 12SP2-11000E-00R
- Front panel board - CFP1030: 9CFP1030NR-00
- Backplane board - CBP10C2: 9CBP10C2NR-00
- Fan module: 25ST2-405623-A0R/25ST2-442828-D0R
- Riser card - CRS101P: 9CRS101PNR-00
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- Power supply: 25EP0-213005-G1S

Optional parts:
- 3-Section Rail kit (Supports CMA): 25HB2-A56120-K0R
- Cable Management Arm: 25HBZ-R18100-K0R